High Strength Carbide Cold Heading Die For Screw Cap Forming Dies

Our main material grades: 
1. YG16C with Co 16%,13.9/cm3, 85.5~85.6HRA, 2.4um, 2850N/mm2, A02B00C00
2. YG20C with Co 20%, 13.4g/cm3, 82HRA, 2.4um, 2500N/mm2, A02B00C00

The tungsten carbide heading dies are used for cold punching and heading of srews and nuts, with high wear resistance and high toughness. 

TYPE of the dies: for drawing metal wires, rods, tubes, plugs and non-standard dies.




Tungsten Carbide Heading dies